Borneol acts as an adjuvant agent to enhance the oral absorption of Panax notoginseng saponins in rats: Effect of optical configuration and compatibility ratios.

ETHNOPHARMACOLOGICAL RELEVANCE: Panax notoginseng saponins (PNS), as the main active component of Panax notoginseng, shows broad pharmacological effects but with low oral bioavailability. Borneol (BO) is commonly used as an adjuvant drug in the field of traditional Chinese medicine, which has been proven to facilitate the absorption of ginsenosides such as Rg1 and Rb1 in vivo. The presence of chiral carbons has resulted in three optical isomers of BO commercially available in the market, all of which are documented by national standards. AIM OF THE STUDY: This study aimed to investigate the role of BO in promoting the oral absorption of PNS from the perspective of optical configuration and compatibility ratios. MATERIALS AND METHODS: In this study, an ultra-performance liquid chromatography coupled with triple quadrupole-linear ion trap tandem mass spectrometry (UPLC-QTRAP-MS/MS) method was validated and applied to determine the concentrations of five main saponins in PNS in rat plasma. The kinetic characteristics of PNS was compared when co-administered with BO based on optical isomerism and different compatibility ratios. RESULTS: The results showed that BO promoted the exposure of PNS in rats. Three forms of BO, namely d-borneol (DB), l-borneol (LB), and synthetic borneol (SB), exhibited different promotion strengths. SB elevated PNS exposure in rats more than DB or LB. It is also interesting to note that under different compatibility ratios, SB can exert a strong promoting effect only when PNS and BO were combined in a 1:1 ratio (PNS 75 mg/kg; BO 75 mg/kg). As a pharmacokinetic booster, the dosage of BO is worthy of consideration and should follow the traditional medication principles of Chinese medicine. CONCLUSIONS: This study shed new light on the compatible use of PNS and BO from the perspective of "configuration-dose-influence" of BO. The results provide important basis for the clinical application and selection of BO.

SIRT1 exerts protective effects by inhibiting endoplasmic reticulum stress and NF-κB signaling pathways.

Silent information regulator two homolog 1 (SIRT1), an NAD + -dependent histone deacetylase, plays a pivotal regulatory role in a myriad of physiological processes. A growing body of evidence suggests that SIRT1 can exert protective effects in metabolic disorders and neurodegenerative diseases by inhibiting endoplasmic reticulum (ER) stress and the nuclear factor-κB (NF-κB) inflammatory signaling pathway. This review systematically elucidates the molecular mechanisms and biological significance of SIRT1 in regulating ER stress and the NF-κB pathway. On one hand, SIRT1 can deacetylate key molecules in the ER stress pathway, such as glucose-regulated protein 78 (GRP78), X-box binding protein 1 (XBP1), PKR-like ER kinase (PERK), inositol-requiring enzyme 1α (IRE1α), and activating transcription factor 6 (ATF6), thereby alleviating ER stress. On the other hand, SIRT1 can directly or indirectly remove the acetylation modification of the NF-κB p65 subunit, inhibiting its transcriptional activity and thus attenuating inflammatory responses. Through these mechanisms, SIRT1 can ameliorate insulin resistance in metabolic diseases, exert cardioprotective effects in ischemia-reperfusion injury, and reduce neuronal damage in neurodegenerative diseases. However, it is important to note that while these findings are promising, the complex nature of the biological systems involved warrants further investigation to fully unravel the intricacies of SIRT1's regulatory mechanisms. Nevertheless, understanding the regulatory mechanisms of SIRT1 on ER stress and the NF-κB pathway is of great significance for expanding our knowledge of the pathogenesis of related diseases and exploring new preventive and therapeutic strategies targeting SIRT1.

A versatile economic strategy by HPLC-CAD for quantification of structurally diverse markers in quality control of Shengmai Formula from raw materials to preparations.

BACKGROUND: Shengmai Formula (SMF), a classic formula in treating Qi-Yin deficiency, is composed of Ginseng Radix et Rhizoma Rubra (GRR), Ophiopogon Radix (OR), and Schisandra chinensis Fructus (SC), and has been developed into various dosage forms including Shengmai Yin Oral Liquid (SMY), Shengmai Capsules (SMC), and Shengmai Injection (SMI). The pharmacological effects of compound Chinese medicine are attributed to the integration of multiple components. Yet the quality criteria of SMF are limited to monitoring schisandrol A or ginsenosides Rg1 and Re, but none for OR. Since the complexity of raw materials and preparations, establishing a economical and unified method for SMF is challenging. It is urgent to simultaneously quantify multiple components with different structures using a universal method for quality control of SMF. Charged aerosol detector (CAD) overcame the above shortcomings owing to its characteristics of high responsiveness, nondiscrimination, and low cost. PURPOSE: We aimed to establish a versatile analysis strategy using HPLC-CAD for simultaneously quantifying the structurally diverse markers in quality control of SMF from raw materials to preparations. METHOD: By optimizing the column, mobile phase, column temperature, flow rate, and CAD parameters, a HPLC-CAD method that integrated multi-component characterization, authenticity identification, transfer information of raw materials and quantitative determination of Shengmai preparations was established. RESULTS: In total 50 components from SMF were characterized (28 in GRR, 13 in SC, and 9 in OR). The differences in raw materials between species of SC and Schisandrae sphenantherae Fructus (SS), processing methods of Ginseng Radix (GR) and GRR, and locations of OR from Sichuan (ORS) and Zhejiang (ORZ) were compared. Fourteen components in 19 batches of SMY, SMC and SMI from different manufacturers were quantified, including 11 ginsenosides and 3 lignans. The multivariate statistical analysis results further suggested that Rb1, Rg1 and Ro were the main differences among Shengmai preparations. CONCLUSION: The established versatile analysis strategy based on HPLC-CAD was proven sensitive, simple, convenient, overcoming the discriminatory effect of UV detector, revealing the composition and transfer information of SMF and applicable for authentication of the ingredient herbs and improving the quality of Shengmai preparations.

Sensor Head Temperature Distribution Reconstruction of High-Precision Gravitational Reference Sensors with Machine Learning.

Temperature fluctuations affect the performance of high-precision gravitational reference sensors. Due to the limited space and the complex interrelations among sensors, it is not feasible to directly measure the temperatures of sensor heads using temperature sensors. Hence, a high-accuracy interpolation method is essential for reconstructing the surface temperature of sensor heads. In this study, we utilized XGBoost-LSTM for sensor head temperature reconstruction, and we analyzed the performance of this method under two simulation scenarios: ground-based and on-orbit. The findings demonstrate that our method achieves a precision that is two orders of magnitude higher than that of conventional interpolation methods and one order of magnitude higher than that of a BP neural network. Additionally, it exhibits remarkable stability and robustness. The reconstruction accuracy of this method meets the requirements for the key payload temperature control precision specified by the Taiji Program, providing data support for subsequent tasks in thermal noise modeling and subtraction.

Insect cuticle-inspired design of sustainably sourced composite bioplastics with enhanced strength, toughness and stretch-strengthening behavior.

Insect cuticles that are mainly made of chitin, chitosan and proteins provide insects with rigid, stretchable and robust skins to defend harsh external environment. The insect cuticle therefore provides inspiration for engineering biomaterials with outstanding mechanical properties but also sustainability and biocompatibility. We herein propose a design of high-performance and sustainable bioplastics via introducing CPAP3-A1, a major structural protein in insect cuticles, to specifically bind to chitosan. Simply mixing 10w/w% bioengineered CPAP3-A1 protein with chitosan enables the formation of plastics-like, sustainably sourced chitosan/CPAP3-A1 composites with significantly enhanced strength (∼90 MPa) and toughness (∼20 MJ m -3), outperforming previous chitosan-based composites and most synthetic petroleum-based plastics. Remarkably, these bioplastics exhibit a stretch-strengthening behavior similar to the training living muscles. Mechanistic investigation reveals that the introduction of CPAP3-A1 induce chitosan chains to assemble into a more coarsened fibrous network with increased crystallinity and reinforcement effect, but also enable energy dissipation via reversible chitosan-protein interactions. Further uniaxial stretch facilitates network re-orientation and increases chitosan crystallinity and mechanical anisotropy, thereby resulting in stretch-strengthening behavior. In general, this study provides an insect-cuticle inspired design of high-performance bioplastics that may serve as sustainable and bio-friendly materials for a wide range of engineering and biomedical application potentials.

Dissolution-Induced Surface Reconstruction of Ni0.95 Pt0.05 Si/p-Si Photocathode for Efficient Photoelectrochemical H2 Production.

Metal silicide/Si photoelectrodes have demonstrated significant potential for application in photoelectrochemical (PEC) water splitting to produce H2 . To achieve an efficient and economical hydrogen evolution reaction (HER), a paramount consideration lies in attaining exceptional catalytic activity on the metal silicide surface with minimal use of noble metals. Here, this study presents the design and construction of a novel Ni0.95 Pt0.05 Si/p-Si photocathode. Dopant segregation is used to achieve a Schottky barrier height as high as 1.0 eV and a high photovoltage of 420 mV. To achieve superior electrocatalytic activity for HER, a dissolution-induced surface reconstruction (SR) strategy is proposed to in situ convert surface Ni0.95 Pt0.05 Si to highly active Pt2 Si. The resulting SR Ni0.95 Pt0.05 Si/p-Si photocathode exhibits excellent HER performance with an onset potential of 0.45 V (vs RHE) and a high maximum photocurrent density of 40.5 mA cm-2 and a remarkable applied bias photon-to-current efficiency (ABPE) of 5.3% under simulated AM 1.5 (100 mW cm-2 ) illumination. The anti-corrosion silicide layer effectively protects Si, ensuring excellent stability of the SR Ni0.95 Pt0.05 Si/p-Si photoelectrode. This study highlights the potential for achieving efficient PEC HER using bimetallic silicide/Si photocathodes with reduced Pt consumption, offering an auspicious perspective for the cost-effective conversion of solar energy to chemical energy.

Specific GAG ratios in the diagnosis of mucopolysaccharidoses.

Mucopolysaccharidoses (MPS) screening is tedious and still performed by analysis of total glycosaminoglycans (GAG) using 1,9-dimethylmethylene blue (DMB) photometric assay, although false positive and negative tests have been reported. Analysis of differentiated GAGs have been pursued classically by gel electrophoresis or more recently by quantitative LC-MS assays. Secondary elevations of GAGs have been reported in urinary tract infections (UTI). In this manuscript, we describe the diagnostic accuracy of urinary GAG measurements by LC-MS for MPS typing in 68 untreated MPS and mucolipidosis (ML) patients, 183 controls and 153 UTI samples. We report age-dependent reference values and cut-offs for chondroitin sulfate (CS), dermatan sulfate (DS), heparan sulfate (HS) and keratan sulfate (KS) and specific GAG ratios. The use of HS/DS ratio in combination to GAG concentrations normalized to creatinine improves the diagnostic accuracy in MPS type I, II, VI and VII. In total 15 samples classified to the wrong MPS type could be correctly assigned using HS/DS ratio. Increased KS/HS ratio in addition to increased KS improves discrimination of MPS type IV by excluding false positives. Some samples of UTI patients showed elevation of specific GAGs, mainly CS, KS and KS/HS ratio and could be misclassified as MPS type IV. Finally, DMB photometric assay performed in MPS and ML samples reveal four false negative tests (sensitivity of 94%). In conclusion, specific GAG ratios in complement to quantitative GAG values obtained by LC-MS enhance discrimination of MPS types. Exclusion of patients with UTI improve diagnostic accuracy in MPS IV but not in other types.

Low-concentration exogenous 3-indoleacetic acid improves fruit-setting rate of Marsdenia tenacissima by inhibiting the expression of embryo abortion-related genes.

Marsdenia tenacissima is a medicinal plant characterized by many flowers, few fruits, and a low fruit-setting rate. Exogenous auxins can improve the fruit-setting rate of plants; however, their impacts on M. tenacissima and regulatory mechanisms remain unclear. In this study, we conducted a field experiment to determine the fruit-setting rate, seed-setting rate, fruit size, and changes in transcriptional expression of related genes by spraying 10 and 50 mg·L-1 of 3-indoleacetic acid (IAA). The control plants were sprayed with distilled water. Our results indicated that the fruit-setting rate was 0.15 when treated with 10 mg·L-1 of IAA, which was 2.76-fold higher than that of the control. Compared with that of the control, the number of differentially expressed genes (DEGs) regulated by 10 mg·L-1 of IAA was 28.6-fold higher than that regulated by 50 mg·L-1 of IAA. These DEGs were closely related to hormone metabolism and fruit development. By transcriptome analysis, spraying 10 mg·L-1 of IAA increased the expressions of STP6, MYB17, and LAX3 and reduced those of CXE18, ILR1-like 3, and SAUR50; this possibly affected the ovule, embryo, and fruit development, thereby elevating the fruit-setting rate of M. tenacissima. Our results indicated that low IAA concentration increased the fruit-setting rate of M. tenacissima, providing theoretical and practical support for promoting the seed yield of M. tenacissima.

Fulvic acid modified ZnO nanoparticles improve nanoparticle stability, mung bean growth, grain zinc content, and soil biodiversity.

Zinc oxide nanoparticles (ZnO NPs) have emerged as a novel solution to combat Zn deficiency in agriculture. However, challenges persist regarding their Zn utilization efficiency and environmental impact. Fulvic acid (FA), as a relatively mature modified material, is a promising candidate to enhance the environmental stability of ZnO NPs. This study investigates modifying ZnO NPs with FA to improve their stability and increase Zn content in mung bean fruit and explores their effect on plants and the soil ecosystem. We combined FA and ZnO NPs (FZ-50) at mass ratios of 1: 5, 1: 2, and 4: 5, denoted as 20 % FZ, 50 % FZ, and 80 % FZ, respectively. Initial germination tests revealed that the 50 % FZ treatment improved sprout growth and Zn content and minimized agglomeration the most. A subsequent pot experiment compared FZ-50 with ZnO, ZnO NPs, and F + Z (1: 1 FA: ZnO NPs). Notably, the FZ-50 treatment (50 % FZ applied to the soil) demonstrated superior results, exhibiting a 30.25 % increase in yield, 121 % improvement in root nodule quality, and 56.38 % increase in Zn content, with no significant changes in enzyme activities (catalase and peroxidase). Furthermore, FZ-50 increased soil available Zn content and promoted soil microorganism diversity, outperforming ZnO and ZnO NPs. This study underscores the potential of FA as a relatively mature material for modifying ZnO NPs to increase grain Zn content, presenting a novel approach to addressing Zn deficiency in agriculture.

Second-line antituberculosis drug exposure thresholds predictive of adverse events in multidrug-resistant tuberculosis treatment.

OBJECTIVES: This study aimed to investigate the association between drug exposure and adverse events (AEs) during the standardized multidrug-resistant tuberculosis (MDR-TB) treatment, as well as to identify predictive drug exposure thresholds. METHODS: We conducted a prospective, observational multicenter study among participants receiving standardized MDR-TB treatment between 2016 and 2019 in China. AEs were monitored throughout the treatment and their relationships to drug exposure (e.g., the area under the drug concentration-time curve from 0 to 24 h, AUC0-24 h) were analyzed. The thresholds of pharmacokinetic predictors of observed AEs were identified by boosted classification and regression tree (CART) and further evaluated by external validation. RESULTS: Of 197 study participants, 124 (62.9%) had at least one AE, and 15 (7.6%) experienced serious AEs. The association between drug exposure and AEs was observed including bedaquiline, its metabolite M2, moxifloxacin and QTcF prolongation (QTcF >450 ms), linezolid and mitochondrial toxicity, cycloserine and psychiatric AEs. The CART-derived thresholds of AUC0-24 h predictive of the respective AEs were 3.2 mg·h/l (bedaquiline M2); 49.3 mg·h/l (moxifloxacin); 119.3 mg·h/l (linezolid); 718.7 mg·h/l (cycloserine). CONCLUSIONS: This study demonstrated the drug exposure thresholds predictive of AEs for key drugs against MDR-TB treatment. Using the derived thresholds will provide the knowledge base for further randomized clinical trials of dose adjustment to minimize the risk of AEs.

Recombinant expression and immune function analysis of C-reactive protein (CRP) from Hexagrammos otakii.

C-reactive protein (CRP) belongs to the short-chain pentraxin family and functions as a soluble pattern recognition molecule (PRM) aiding in host defense against pathogens. In the present study, a CRP gene, designated HoCRP, was cloned from Hexagrammos otakii for the first time. The full length of the HoCRP cDNA sequence is 821 bp, which contains an open reading frame (ORF) of 675 bp encoding a 224 amino acid protein. The deduced protein is predicted to have a theoretical isoelectric point (pI) of 5.30 and a molecular weight of 25.4 kDa. The recombinant HoCRP protein (rHoCRP) was expressed in E. coli to further characterize the functions of HoCRP. Saccharide binding experiments demonstrated that rHoCRP exhibited a high affinity for various pathogen-associated molecular patterns (PAMPs). Furthermore, bacterial binding and agglutination assays indicated that rHoCRP had the capability to recognize a wide spectrum of microorganisms. These findings suggest that HoCRP functions not only as a PRM for binding PAMPs but also as an immune effector molecule. Considering the role CRP plays in the classical complement pathway, the interaction between rHoCRP and rHoC1q was assessed and proven by a Pull-down and Elisa assay, which implied that rHoCRP may be able to activate complement. In addition, phagocytosis enhancement by rHoCRP in the presence or absence of complement components was analysed by flow cytometry. The results showed that rHoCRP could synergistically enhance the phagocytosis of RAW264.7 cells with complement, providing further evidence of complement activation by rHoCRP through the opsonization of specific complement components. In summary, our findings suggest that rHoCRP may play a crucial role in host antibacterial defense by recognizing pathogens, activating the complement system, and enhancing macrophage function.

Reduction of lysosome abundance and GAG accumulation after odiparcil treatment in MPS I and MPS VI models.

Deficiencies of lysosomal enzymes responsible for the degradation of glycosaminoglycans (GAG) cause pathologies commonly known as the mucopolysaccharidoses (MPS). Each type of MPS is caused by a deficiency in a specific GAG-degrading enzyme and is characterized by an accumulation of disease-specific GAG species. Previously, we have shown the potential of the beta-D-xyloside, odiparcil, as an oral GAG clearance therapy for Maroteaux-Lamy syndrome (MPS VI), an MPS characterized by an accumulation of chondroitin sulphate (CS) and dermatan sulphate (DS). This work suggested that odiparcil acts via diverting the synthesis of CS and DS into odiparcil-bound excretable GAG. Here, we investigated the effect of odiparcil on lysosomal abundance in fibroblasts from patients with MPS I and MPS VI. In MPS VI fibroblasts, odiparcil reduced the accumulation of a lysosomal-specific lysotracker dye. Interestingly, a reduction of the lysotracker dye was also observed in odiparcil-treated fibroblasts from patients with MPS I, a disorder characterized by an accumulation of DS and heparan sulphate (HS). Furthermore, odiparcil was shown to be effective in reducing CS, DS, and HS concentrations in liver and eye, as representative organs, in MPS VI and MPS I mice treated with 3 doses of odiparcil over 3 and 9 months, respectively. In conclusion, our data demonstrates odiparcil efficiently reduced lysosome abundance and tissue GAG concentrations in in vitro and in vivo models of MPS VI and MPS I and has potential as a treatment for these disorders.

Genome folding principles revealed in condensin-depleted mitotic chromosomes.

During mitosis, condensin activity interferes with interphase chromatin structures. Here, we generated condensin-free mitotic chromosomes to investigate genome folding principles. Co-depletion of condensin I and II, but neither alone, triggered mitotic chromosome compartmentalization in ways that differ from interphase. Two distinct euchromatic compartments, indistinguishable in interphase, rapidly emerged upon condensin loss with different interaction preferences and dependence on H3K27ac. Constitutive heterochromatin gradually self-aggregated and co-compartmentalized with the facultative heterochromatin, contrasting with their separation during interphase. While topologically associating domains (TADs) and CTCF/cohesin mediated structural loops remained undetectable, cis-regulatory element contacts became apparent, providing an explanation for their quick re-establishment during mitotic exit. HP1 proteins, which are thought to partition constitutive heterochromatin, were absent from mitotic chromosomes, suggesting, surprisingly, that constitutive heterochromatin can self-aggregate without HP1. Indeed, in cells traversing from M- to G1-phase in the combined absence of HP1α, HP1ß and HP1γ, re-established constitutive heterochromatin compartments normally. In sum, "clean-slate" condensing-deficient mitotic chromosomes illuminate mechanisms of genome compartmentalization not revealed in interphase cells.

Active oxygen species mediate the iron-promoting electrocatalysis of oxygen evolution reaction on metal oxyhydroxides.

Iron is an extraordinary promoter to impose nickel/cobalt (hydr)oxides as the most active oxygen evolution reaction catalysts, whereas the synergistic effect is actively debated. Here, we unveil that active oxygen species mediate a strong electrochemical interaction between iron oxides (FeOxHy) and the supporting metal oxyhydroxides. Our survey on the electrochemical behavior of nine supporting metal oxyhydroxides (M(O)OH) uncovers that FeOxHy synergistically promotes substrates that can produce active oxygen species exclusively. Tafel slopes correlate with the presence and kind of oxygen species. Moreover, the oxygen evolution reaction onset potentials of FeOxHy@M(O)OH coincide with the emerging potentials of active oxygen species, whereas large potential gaps are present for intact M(O)OH. Chemical probe experiments suggest that active oxygen species could act as proton acceptors and/or mediators for proton transfer and/or diffusion in cooperative catalysis. This discovery offers a new insight to understand the synergistic catalysis of Fe-based oxygen evolution reaction electrocatalysts.

Perfusion Collateral Index versus Hypoperfusion Intensity Ratio in Assessment of Collaterals in Patients with Acute Ischemic Stroke.

BACKGROUND AND PURPOSE: Perfusion-based collateral indices such as the perfusion collateral index and the hypoperfusion intensity ratio have shown promise in the assessment of collaterals in patients with acute ischemic stroke. We aimed to compare the diagnostic performance of the perfusion collateral index and the hypoperfusion intensity ratio in collateral assessment compared with angiographic collaterals and outcome measures, including final infarct volume, infarct growth, and functional independence. MATERIALS AND METHODS: Consecutive patients with acute ischemic stroke with anterior circulation proximal arterial occlusion who underwent endovascular thrombectomy and had pre- and posttreatment MRI were included. Using pretreatment MR perfusion, we calculated the perfusion collateral index and the hypoperfusion intensity ratio for each patient. The angiographic collaterals obtained from DSA were dichotomized to sufficient (American Society of Interventional and Therapeutic Neuroradiology [ASITN] scale 3-4) versus insufficient (ASITN scale 0-2). The association of collateral status determined by the perfusion collateral index and the hypoperfusion intensity ratio was assessed against angiographic collaterals and outcome measures. RESULTS: A total of 98 patients met the inclusion criteria. Perfusion collateral index values were significantly higher in patients with sufficient angiographic collaterals (P < .001), while there was no significant (P = .46) difference in hypoperfusion intensity ratio values. Among patients with good (mRS 0-2) versus poor (mRS 3-6) functional outcome, the perfusion collateral index of ≥ 62 was present in 72% versus 31% (P = .003), while the hypoperfusion intensity ratio of ≤0.4 was present in 69% versus 56% (P = .52). The perfusion collateral index and the hypoperfusion intensity ratio were both significantly predictive of final infarct volume, but only the perfusion collateral index was significantly (P = .03) associated with infarct growth. CONCLUSIONS: Results show that the perfusion collateral index outperforms the hypoperfusion intensity ratio in the assessment of collateral status, infarct growth, and determination of functional outcomes.

Digital light processing 3D printing for microfluidic chips with enhanced resolution via dosing- and zoning-controlled vat photopolymerization.

Conventional manufacturing techniques to fabricate microfluidic chips, such as soft lithography and hot embossing process, have limitations that include difficulty in preparing multiple-layered structures, cost- and labor-consuming fabrication process, and low productivity. Digital light processing (DLP) technology has recently emerged as a cost-efficient microfabrication approach for the 3D printing of microfluidic chips; however, the fabrication resolution for microchannels is still limited to sub-100 microns at best. Here, we developed an innovative DLP printing strategy for high resolution and scalable microchannel fabrication by dosing- and zoning-controlled vat photopolymerization (DZC-VPP). Specifically, we proposed a modified mathematical model to precisely predict the accumulated UV irradiance for resin photopolymerization, thereby providing guidance for the fabrication of microchannels with enhanced resolution. By fine-tuning the printing parameters, including optical irradiance, exposure time, projection region, and step distance, we can precisely tailor the penetration irradiance stemming from the photopolymerization of the neighboring resin layers, thereby preventing channel blockage due to UV overexposure or compromised bonding stability owing to insufficient resin curing. Remarkably, this strategy can allow the preparation of microchannels with cross-sectional dimensions of 20 µm × 20 µm using a commercial printer with a pixel size of 10 µm × 10 µm; this is significantly higher resolution than previous reports. In addition, this method can enable the scalable and biocompatible fabrication of microfluidic drop-maker units that can be used for cell encapsulation. In general, the current DZC-VPP method can enable major advances in precise and scalable microchannel fabrication and represents a significant step forward for widespread applications of microfluidics-based techniques in biomedical fields.

Synergistic γ-In2 Se3 @rGO Nanocomposites with Beneficial Crystal Transformation Behavior for High-Performance Sodium-Ion Batteries.

Crystal transformation of metal compound cathodes during charge/discharge processes in alkali metal-ion batteries usually generates profound impact on structural stability and electrochemical performance, while the theme in anode materials, which always occurs and completes during the first redox cycle, is rarely explored probably due to the fast transformation dynamics. Herein, for the first time, a unique crystal transformation behavior with slow dynamics in anode of sodium-ion batteries (SIBs) is reported, which further promotes electrochemical performance. Specifically, irreversible γ → ß crystal transformation of In2 Se3 is observed, induced by the persistent size degradation of In2 Se3 particles during repeated sodiation/desodiation, supported by a series of ex situ characterizations, such as HRTEM, XRD, and XPS of γ-In2 Se3 /reduced graphene oxide (γ-In2 Se3 @rGO) nanocomposite. The hybrid electrode shows ultrahigh long-term cycling stability (378 mA h g-1 at 1.0 A g-1 after 1000 cycles) and excellent rate capability (272 mA h g-1 at 20.0 A g-1 ). Full battery with Na3 V2 (PO4 )3 cathode also manifests superior performance, promising ß-In2 Se3 dominated electrode materials in high-power and long-life SIBs. The first-principle calculations suggest the crystal transformation enhances electric conductivity of ß-In2 Se3 and facilitates its accessibility to sodium. In combination with the synergistic effect between rGO matrix, substantially enhanced electrochemical performance is realized.

Pathogenic bacteria defense and complement activation function analysis of Collectin-10 from Hexagrammos otakii.

With the tremendous success of the artificial breeding of Hexagrammos otakii, the yield has been substantially improved. However, intensive farming often results in bacterial diseases; hence it is imperative to find new antimicrobial molecules. In the present study, we identified a homologous cDNA fragment of collectin-10 from H. otakii, designated as HoCL-10. The cDNA length is 899 bp, which contains an open reading frame (ORF) of 816 bp encoding a secreted protein with 272 amino acid residues. The peptide of HoCL-10 contains an N-terminal collagen domain, a neck region, and a C-terminal carbohydrate recognition domain. The qRT-PCR results revealed that HoCL-10 mRNA was highest expressed in the liver and skin and was significantly induced post-LPS stimulation. The sugar and bacteria binding assay suggested that the recombinant HoCL-10 (rHoCL-10) could recognize various pathogen-associated molecular patterns (PAMPs) and bacteria. For effect on cells, rHoCL-10 enhanced the phagocytosis and migration ability of the macrophage indicated using pro-phagocytosis assay and trans-well assay. To determine the role of HoCL-10 in the complement system, the interaction between HoCL-10 and mannose-binding lectin associated serine protease 1, 2 (MASP-1, 2) were analyzed and demonstrated using ELISA and Far-western. And in vivo, the concentration of membrane-attack complex (MAC) in fish plasma was significantly down-regulated post-injection with HoCL-10 antibody. Finally, the bacteria challenge experiment was performed, implying that HoCL-10 may assist the host in defending against microbial invasion. The findings suggest that HoCL-10 may play crucial roles in host defense against microorganisms, possibly through opsonizing pathogens and activating the complement system.

Amorphous Ni-Mo-B-O Bifunctional Electrocatalyst for Simultaneous Production of Hydrogen and Value-added Chemicals.

Hydrogen evolution reaction (HER) coupled with biomass conversion is a sustainable route to produce clean energy H2 and value-added chemicals simultaneously. Herein, an amorphous Ni-Mo-B-O bifunctional electrocatalyst was synthesized through a facile electrodeposition method and employed as a cathode for HER to produce H2 and as an anode for the conversion of hydroxymethylfurfural (HMF) to furandicarboxylic acid (FDCA). Besides leading to the formation of amorphous structures, the introduction of Mo and B can increase the electron density and optimize the electronic structure of the electrocatalyst, thus substantially increasing the catalytic activity of the catalyst. After continuous reaction at a constant potential of 0.58 V vs. Hg/HgO for 8 hours, the conversion of HMF reached 98.86 %, and the selectivity of the target product FDCA was as high as 92.97 %. Finally, a two-electrolyzer system was constructed using the amorphous Ni-Mo-B-O as both cathode and anode to achieve simultaneous H2 production in the cathode chamber and FDCA production in the anode chamber at a low voltage. This work presents a promising strategy for the design and synthesis of high-performance non-noble metal electrocatalysts for efficient and cost-effective H2 production.